Built for demanding Australian transport conditions, Viking Drop Deck Trailers combine heavy-duty construction, practical design and reliable performance. Available in multiple configurations to suit machinery, equipment, containers and general freight, the Viking range is built to work hard and deliver day after day. Explore the range below to find the right trailer for your operation.







• Trailer: 45ft Tri-Axle Drop Deck Semi-Trailer
• ATM: 40 Tonne
• Deck: 5mm checkerplate steel floor with 19mm flange chassis rails
• Running Gear: K-Hitch 8-stud 19.5 11.5-ton axles
• Suspension: K-Hitch Air Bag Suspension with raise/lower valve
• Static Deck Height: 990mm with raise/lower valve
• Braking: Drum / EBS / ABS braking system
• Ramps: Hydraulic/electric bi-fold loading ramps
• Power: 12V power pack & lights
• Controls: Handheld plug-in remote for ramps, with Anderson charging plug at front for battery
• Container Handling: 3-way container pins with pedestals for 40ft/20ft/10ft containers
• Access: Top slide-out ramps, front gates & full set of side gates
• Storage: 2 x toolboxes & water tank
• Wheels & Tyres: 245/70R19.5 16-ply
• Spares: 1 x spare wheel with dual spare wheel carrier (optional extra spare)
• Load Equipment: 8 x load binders with 9m straps (4 x lower deck & 4 x top deck)
• Road Train: Ringfeeder bracket (R/T rated optional)
• Landing Gear: Jost 2-speed landing legs
• Kingpin: 2 x placement Jost 2″ bolt-on kingpin
• Paint: Optional 2-pack paint colours to coaming rails & deck
• Permit: Permit supplied for transport
• Paint colour
• Polished/Chrome outer wheels
• Ring Feeder and plumbing
• Winch
12 Month Australia-Wide Warranty
Every Viking trailer is backed by a 12-month Australia-wide warranty, giving you confidence and support wherever you’re operating.
For warranty assistance, technical support or replacement parts, contact the Viking Trailers & Equipment team on 1300 90 90 97
Heavy-duty drop deck trailers built for Australian transport and machinery applications. Explore the Viking range below.







• Trailer: 45ft Tri-Axle Drop Deck Semi-Trailer
• ATM: 40 Tonne
• Deck: 5mm checkerplate steel floor with 19mm flange chassis rails
• Running Gear: K-Hitch 8-stud 22.5 11.5-ton axles
• Suspension: K-Hitch Air Bag Suspension with raise/lower valve
• Static Deck Height: 1070mm with raise/lower valve
• Braking: Drum / EBS / ABS braking system
• Ramps: Hydraulic/electric bi-fold loading ramps
• Power: 12V power pack & lights
• Controls: Handheld plug-in remote for ramps, with Anderson charging plug at front for battery
• Container Handling: 3-way container pins with pedestals for 40ft/20ft/10ft containers
• Access: Top slide-out ramps, front gates & full set of side gates
• Storage: 2 x toolboxes & water tank
• Wheels & Tyres: 255/70R22.5 16-ply
• Spares: 1 x spare wheel with dual spare wheel carrier (optional extra spare)
• Load Equipment: 8 x load binders with 9m straps (4 x lower deck & 4 x top deck)
• Road Train: Ringfeeder bracket (R/T rated optional)
• Landing Gear: Jost 2-speed landing legs
• Kingpin: 2 x placement Jost 2″ bolt-on kingpin
• Paint: Optional 2-pack paint colours to coaming rails & deck
• Permit: Permit supplied for transport
• Paint colour
• Polished/Chrome outer wheels
• Ring Feeder and plumbing
• Winch
12 Month Australia-Wide Warranty
Every Viking trailer is backed by a 12-month Australia-wide warranty, giving you confidence and support wherever you’re operating.
For warranty assistance, technical support or replacement parts, contact the Viking Trailers & Equipment team on 1300 90 90 97
Heavy-duty drop deck trailers built for Australian transport and machinery applications. Explore the Viking range below.




• Length: Extends from 13.6m to 19.7m (45–62ft)
• ATM: 40 Tonne
• Deck Height: 900mm
• Tare Weight: Approx. 11.4 Tonne
• Deck: 19mm flange chassis with 5mm checkerplate steel floor to upper and lower decks
• Coaming Rails: 120mm Q345E grade steel
• Extension System: Auto-air controlled locking pin for extending and closing
• Extension Increments: 1700mm / 1700mm / 1300mm / 1300mm
• Running Gear: K-Hitch 285 PCD 10-stud 11.5-tonne axles
• Suspension: K-Hitch Air Bag Suspension with WABCO raise/lower valve
• Wheels & Tyres: 235/75R17.5 steel rims with 16-ply tyres
• Braking: ABS/EBS braking system
• Ramps: Heavy-duty hydraulic/electric bi-fold loading ramps
• Power: 12V electric/hydraulic power pack to operate ramps
• Controls: Handheld remote control for ramp operation
• Charging: Anderson charging plug at front for 12V power pack battery
• Container Handling: 3-way container pins with pedestals for 40ft/20ft/10ft containers
• Access: Top deck slide-out ramps and front gate/headboard
• Storage: 2 x toolboxes
• Spares: 1 x spare wheel with dual spare wheel carrier
• Load Equipment: In-deck chain bars and slots with 8 x load binders on rails and 9m straps (4 x top deck and 4 x bottom deck)
• Landing Gear: Jost 2-speed landing legs
• Kingpin: Jost 2″ kingpin with 2-pin placement
• Paint: Silver chassis with optional paint colours to coaming rails and decks
• Safety: All required safety signage and rear flashing light
• Permit: Permit supplied for transport
• Paint colour
• Polished/Chrome outer wheels
• Ring Feeder and plumbing
• Winch
12 Month Australia-Wide Warranty
Every Viking trailer is backed by a 12-month Australia-wide warranty, giving you confidence and support wherever you’re operating.
For warranty assistance, technical support or replacement parts, contact the Viking Trailers & Equipment team on 1300 90 90 97
Heavy-duty drop deck trailers built for Australian transport and machinery applications. Explore the Viking range below.




• Length: Extends from 13.6m to 19.7m (45–62ft)
• ATM: 40 Tonne
• Deck Height: 1150mm
• Tare Weight: Approx. 11.4 Tonne
• Deck: 19mm flange chassis with 5mm checkerplate steel floor to upper and lower decks
• Coaming Rails: 120mm Q345E grade steel
• Extension System: Auto-air controlled locking pin for extending and closing
• Extension Increments: 1700mm / 1700mm / 1300mm / 1300mm
• Running Gear: K-Hitch 285 PCD 10-stud 11.5-tonne axles
• Suspension: K-Hitch Air Bag Suspension with WABCO raise/lower valve
• Wheels & Tyres: 265/11R22.5 steel rims with 16-ply tyres
• Braking: ABS/EBS braking system
• Ramps: Heavy-duty hydraulic/electric bi-fold loading ramps
• Power: 12V electric/hydraulic power pack to operate ramps
• Controls: Handheld remote control for ramp operation
• Charging: Anderson charging plug at front for 12V power pack battery
• Container Handling: 3-way container pins with pedestals for 40ft/20ft/10ft containers
• Access: Top deck slide-out ramps and front gate/headboard
• Storage: 2 x toolboxes
• Spares: 1 x spare wheel with dual spare wheel carrier
• Load Equipment: In-deck chain bars and slots with 8 x load binders on rails and 9m straps (4 x top deck and 4 x bottom deck)
• Landing Gear: Jost 2-speed landing legs
• Kingpin: Jost 2″ kingpin with 2-pin placement
• Paint: Silver chassis with optional paint colours to coaming rails and decks
• Safety: All required safety signage and rear flashing light
• Permit: Permit supplied for transport
• Paint colour
• Polished/Chrome outer wheels
• Ring Feeder and plumbing
• Winch
12 Month Australia-Wide Warranty
Every Viking trailer is backed by a 12-month Australia-wide warranty, giving you confidence and support wherever you’re operating.
For warranty assistance, technical support or replacement parts, contact the Viking Trailers & Equipment team on 1300 90 90 97
Heavy-duty drop deck trailers built for Australian transport and machinery applications. Explore the Viking range below.